Unscrew the top of the tank (by twisting the silver cap). Be careful not to remove the entire tank - we recommend holding the Pockex firmly by the tank section whilst unscrewing the top. The coils should remain attached to the top cap, leaving you with the battery and tank section. Fill the tank with e-liquid up to the 'MAX' line marked on the tank, then reattach the top cap and coil. If the coil is new then remember to let the e-liquid soak in for 15-20 minutes before using it.

On average we advise that coils will last for around 2-3 bottles worth (20-30ml) of e-liquid before they'll need replacing. Bear in mind that this depends on your individual vaping style so "your mileage may vary" and they last many people much longer than this!

Yes, it's generally regarded as a mouth-to-lung kit but the airflow is relatively airy compared with other MTL devices, so it is possible to use a (gentle) direct lung inhalation technique.

Yes, we stock Aspire Pockex spares including replacement top caps, spare metal/glass tank tubes, extra mouthpieces (drip tips) and of course Pockex coils.

Unscrew the top cap from the Pockex kit - the old coil will be attached. Unscrew the old coil and screw the new one onto the top cap. Be careful because it is possible to screw the coil in the wrong way around - ensure that the end of the coil with the hole in it is attached to the top cap, otherwise it won't work. As always when replacing a coil, allow the e-liquid to soak in for 20-30 minutes before using it.

Because the airflow channels are at the top of the tank rather than the bottom, it's extremely unlikely that the Pockex will leak if it's kept in an upright position. However, we know that in the real world it's almost impossible to keep a vape kit upright at all times, and there isn't a kit on the market that is absolutely 100% leak-proof, but rest assured that the Pockex is not prone to excessive leaking!