Click & Collect:Available
Loyalty Points: Click for info
Best Sellers
Multi-Buy Deals
Deals
Vape Kit Types
Filter Products
Coil Type
Fill Type
Pack Size
Pod Type
Filter By
Keep your compatible Elf Bar kit ready to use with our range of Elf Bar vape pods, covering refillable ELFX cartridges alongside prefilled replacement pods for devices such as the Elf Bar 600 and AF5500. From built-in dual mesh coils in different resistances to ready-filled 20mg nicotine salt pods, the range covers several very different Elf Bar systems, so matching the cartridge to your exact device should always come first.
Active filters
Elf Bar is best known for convenient vape hardware, but its current pod range now stretches well beyond the traditional prefilled format.
Depending on the device you own, an Elf Bar replacement pod might be a completely refillable cartridge that you fill with your own e-liquid, or a sealed pod that arrives already filled and ready to use.
Our current range includes both.
That means you'll find:
These products aren't interchangeable.
An ELFX cartridge is intended for the ELFX refillable platform, while an Elf Bar 600 pod belongs to a prefilled system. The AF5500 uses another format again.
The Elf Bar name on its own isn't enough to establish compatibility.
The first decision therefore isn't resistance or flavour.
It's whether your device uses a refillable ELFX cartridge or one of Elf Bar's prefilled pod systems.
The Elf Bar ELFX 2.0 Replacement Pods are the latest refillable cartridge option currently represented in our range.
Each cartridge holds 2ml of e-liquid, uses a built-in QUAQ dual mesh coil and is filled from the top. They come in packs of three, with our current selection offering:
Once the coil inside begins to deteriorate, there's no separate coil to remove. You simply replace the complete cartridge.
That keeps maintenance very straightforward while still letting you choose your own e-liquid.
One of the more useful aspects of the newer ELFX platform is broad cartridge compatibility.
Compatible devices across the ELFX family can include:
That gives the cartridge more useful cross-generation compatibility than many proprietary pod systems.
As ever, though, checking the full device name before ordering is still sensible.
The 0.6Ω ELFX 2.0 cartridge is the lower-resistance option in our current selection.
It offers a somewhat warmer and more open draw than the 0.8Ω version, sitting closer to restricted-direct-lung territory while still being compact enough for everyday pod use.
It is likely to suit you better if you prefer:
The exact output can depend on the device being used.
The 0.8Ω ELFX 2.0 pod moves further towards traditional MTL.
Compared with the 0.6Ω version, the draw is generally tighter and the output more controlled.
Typical characteristics include:
If you're mainly using an ELFX device for straightforward MTL vaping, the 0.8Ω option is likely to be the more natural choice.
Neither resistance is universally better.
The difference is mainly about how open, warm and powerful you want the draw to feel.
The original Elf Bar ELFX Replacement Pods use the same broad refillable philosophy.
These are integrated-coil cartridges designed around Elf Bar's QUAQ Dual Mesh technology.
The original ELFX system was introduced as an open refillable platform, moving away from prefilled-only vaping while retaining the sort of compact device format associated with the brand.
Our current ELFX pods are offered in:
and are supplied as refillable cartridges rather than prefilled consumables.
The heating element inside ELFX pods uses dual mesh rather than one conventional narrow coil.
Mesh creates a broader heating surface in contact with the wick.
Elf Bar's ELFX system uses two mesh elements, with the exact operation depending on the compatible device and operating mode.
The broad aim is to provide:
On compatible devices, Eco and Turbo operating modes can alter how the dual mesh elements are used.
The newer Pod 2.0 is an evolution of the original ELFX cartridge rather than an entirely unrelated product.
The newer 2.0 platform is designed with the wider current ELFX device family in mind.
At the other end of the category are the Elf Bar 600 Prefilled Vape Pods.
These don't need to be filled manually.
Each cartridge arrives already containing nicotine salt e-liquid, making them a completely different proposition from ELFX refillable pods.
Our current listing offers 21 flavours, with each pack containing two prefilled pods rated at up to around 600 puffs per pod. The pods contain 20mg nicotine strength and use built-in QUAQ mesh coils.
Actual puff count naturally depends on draw length and individual use.
The Elf Bar 600 Prefilled Pod Kit uses compatible Elf Bar prefilled cartridges within its own pod ecosystem.
This broader compatibility shouldn't be confused with ELFX.
ELFA and ELFX are separate Elf Bar platforms.
The names are annoyingly similar, but the pods aren't simply interchangeable because they share the same brand.
This is arguably the most useful distinction on the entire category.
Prefilled pods minimise setup.
Refillable pods give you far greater choice over flavour, nicotine strength and e-liquid brand.
The Elf Bar AF5500 Refill Pods belong to another of Elf Bar's prefilled systems.
The AF5500 uses a combination of a 2ml pod and larger refill container, with the complete system using a 10ml refill container alongside the 2ml cartridge.
The liquid is supplied at 20mg/ml nicotine strength, and the complete AF5500 system is rated at up to around 5500 puffs.
Our current category includes AF5500 refill options in 10 flavours.
The AF5500 isn't simply a larger ordinary pod.
Its design combines two e-liquid sections:
The reservoir supplies liquid into the pod during use.
That arrangement allows the system to hold considerably more e-liquid overall while retaining a smaller working cartridge at the top of the device.
No.
Although the product uses the word "refill", AF5500 refill packs are part of a prefilled proprietary system.
They're not comparable to ELFX cartridges where you open the filling port and add your own bottle of e-liquid.
This difference is worth making clear:
Elf Bar now covers both approaches.
Refillable ELFX cartridges let you choose:
You keep refilling the cartridge until its built-in coil reaches the end of its usable life.
Prefilled cartridges arrive ready to use.
There is:
Once the e-liquid is depleted or the coil is finished, the pod is replaced.
The device name should always be your starting point.
Look for compatible ELFX or ELFX 2.0 refillable cartridges.
Choose compatible Elf Bar 600 prefilled pods.
Use the dedicated AF5500 refill pods.
Check compatibility with the relevant ELFA or compatible prefilled pod format rather than assuming an ELFX cartridge will fit.
That one letter makes quite a difference.
This is a common source of confusion.
ELFA and ELFX are separate product families.
ELFA is associated primarily with compact prefilled and refillable cartridge systems, while ELFX is Elf Bar's newer open-system refillable platform built around dual-mesh pods.
If you're replacing a pod, read the complete product name rather than stopping at "Elf Bar".
All of the pods currently represented in this category use coils integrated into the cartridge itself.
That means you don't separately buy and install a replacement heating coil.
When the coil wears out:
With a refillable ELFX pod, fill the new cartridge first and allow the wick to saturate.
With prefilled pods, the cartridge already contains the liquid.
Most products in this range lean towards MTL, or mouth-to-lung use.
MTL means drawing vapour into your mouth before inhaling.
Elf Bar 600 and AF5500 prefilled systems broadly occupy this territory.
Some ELFX resistance options offer a looser RDL, or restricted-direct-lung draw.
The 0.6Ω ELFX cartridges are the clearest example within our current range.
Compared with a traditional MTL setup, RDL generally gives you:
It remains more restricted than a large open-airflow sub-ohm tank.
Because ELFX pods are refillable, liquid selection matters.
The 0.6Ω and 0.8Ω options in our current range are particularly well matched with balanced e-liquids such as:
The 0.8Ω cartridge is the more obvious choice for stronger MTL-focused nic salt use, while the 0.6Ω pod provides more vapour and a looser draw.
Avoid assuming that very thick shortfill liquid will suit every cartridge simply because it's refillable.
Elf Bar's own Elfliq nicotine salts are 10ml bottled e-liquids intended for refillable pod systems.
That makes them a natural pairing with refillable ELFX cartridges, provided the nicotine strength suits your needs.
This also gives users who are familiar with Elf Bar's prefilled flavour profiles a route into a refillable system without being restricted to sealed prefilled pods.
The exact filling mechanism depends on the cartridge generation, but the process is simple.
For ELFX 2.0 top-fill pods:
There's no separate coil installation required.
A new refillable pod contains dry wicking material.
That wick needs time to absorb e-liquid before the coil heats up.
After filling a fresh ELFX pod:
Skipping that initial soak is one of the easiest ways to damage a fresh pod.
Not in the same way as manually refillable cartridges.
Prefilled pods are supplied containing e-liquid, but some systems can still require a simple activation step when first installed.
Follow the instructions for your exact kit.
There isn't one fixed number of days.
Pod lifespan depends on:
Performance is a better indicator than simply counting days.
Signs can include:
Because the coil is built in, you replace the complete pod when its heating element is finished.
With a refillable ELFX cartridge, common causes include:
Once the wick has genuinely scorched, adding more liquid normally won't fix it.
Replace the cartridge.
A small amount of moisture beneath a cartridge may simply be condensation.
More substantial leaking can result from:
Newer cartridges include sealing features designed to reduce leaking, but refillable pods should still be stored and handled sensibly.
A few sensible habits help:
Ultimately, an integrated cartridge is a consumable.
The goal isn't to make it last forever, just to avoid shortening its life unnecessarily.
Elf Bar 600 pods are supplied as prefilled cartridges.
When the e-liquid is depleted, replace the pod rather than attempting to open and refill it.
If you want to use bottled e-liquid, a refillable platform such as ELFX is the appropriate type of system.
Our current Elf Bar 600 pod range is supplied at 20mg nicotine strength.
Our current listing supplies two Elf Bar 600 prefilled pods per pack.
This differs from the ELFX replacement range, which currently comes in packs of three.
Elf Bar now operates several different cartridge systems, including:
Some have cross-compatibility within their own family, but that should never be extended across the entire brand without checking.
The safest process is:
Check your exact device model first. ELFX devices use ELFX-compatible refillable cartridges, while the Elf Bar 600 and AF5500 use their own prefilled pod systems.
Yes. ELFX and ELFX 2.0 replacement cartridges are designed to be filled with compatible bottled e-liquid.
No. The coil is built into the cartridge, so the complete pod is changed when the coil wears out.
Our current ELFX and ELFX 2.0 range includes 0.6Ω and 0.8Ω cartridges.
The 0.8Ω option provides the tighter, lower-powered draw and is the more clearly MTL-focused choice.
The 0.6Ω cartridge provides the warmer and more open draw of the two current options.
Yes. They arrive already filled with nicotine salt e-liquid and don't need manual refilling.
Two.
No. Elf Bar 600 pods are prefilled cartridges, while ELFX pods are refillable cartridges for the ELFX platform.
No. ELFA and ELFX are separate Elf Bar systems.
No. They are part of the AF5500 prefilled refill system rather than an open cartridge designed for bottled e-liquid.
Yes. Compatible 50/50 nicotine salt e-liquids are well suited to the higher-resistance ELFX cartridges in our range.
There's no fixed schedule. Replace it when flavour or vapour clearly deteriorates, when a persistent burnt taste develops, or if the cartridge becomes physically damaged.
Our Elf Bar vape pod range now covers considerably more than one style of cartridge.
If you want the freedom to choose your own liquid, ELFX and ELFX 2.0 refillable pods provide integrated dual-mesh cartridges in 0.6Ω and 0.8Ω resistance options. If simplicity matters more, Elf Bar 600 prefilled pods arrive ready to use, while the AF5500 refill system offers another prefilled format built around its larger-capacity device.
The important bit is compatibility.
Don't simply buy an Elf Bar pod because the brand matches your kit. Find the exact device name, establish which cartridge system it uses, and then choose your resistance or flavour from there.
Do that, and replacing the pod becomes the simple part.
