Click & Collect:Available
Loyalty Points: Click for info
Best Sellers
Multi-Buy Deals
Deals
Vape Kit Types
Filter Products
Coil Type
Fill Type
Colour
Filter By
Browse our range of KangerTech vape tanks and clearomisers, including the classic EVOD, EVOD 2 and CE4 styles that helped define early refillable vape hardware. Compact, straightforward and designed around lower-powered mouth-to-lung use, these tanks remain particularly useful for compatible eGo and pen-style vape batteries.
Active filters
KangerTech is one of those names that's closely tied to the earlier generations of refillable vaping.
Long before modern pod kits became dominant, KangerTech produced compact clearomisers and tanks designed to screw onto simple pen-style batteries. The formula was uncomplicated: fill the tank, fit it to the battery and replace the coil when necessary.
Our current KangerTech tank range stays very much within that classic format.
You'll find:
These are all relatively compact, low-powered tanks intended primarily for MTL use rather than high-wattage sub-ohm vaping.
The biggest difference is maintenance.
EVOD and EVOD 2 tanks are designed around replaceable coil heads, whereas a CE4 is treated as a complete consumable clearomiser.
The KangerTech EVOD Tank is one of the brand's most recognisable older clearomiser designs.
Its narrow cylindrical shape was made to sit neatly on eGo and EVOD-style batteries, creating the traditional pen-shaped vape setup that became extremely common before modern pod kits arrived.
The EVOD uses a bottom-coil layout, placing the heating element towards the base of the tank rather than near the mouthpiece.
That design helps keep the wick closer to the e-liquid held in the reservoir.
The EVOD doesn't rely on screens, adjustable airflow or complex settings.
Its appeal is largely down to that simplicity.
There's very little else to configure.
That makes the EVOD especially relevant to users who still prefer straightforward pen-style hardware.
The KangerTech EVOD 2 follows the same basic format but uses a bottom dual-coil system.
Our current listing specifies a 1.6ml capacity, bottom filling, fixed MTL airflow and a removable 510-style drip tip.
It comes fitted with a 1.5Ω dual coil, with compatible dual-coil heads also available in other resistance options such as 1.8Ω.
The result is still very much a traditional low-powered MTL setup rather than anything designed for large vapour production.
The two tanks look broadly similar, but the EVOD 2 introduced a dual-coil configuration.
The EVOD 2 therefore sits as a slightly more developed version of the same basic design philosophy rather than a completely different type of tank.
The KangerTech CE4 Clearomiser is even simpler.
Unlike EVOD tanks that are built around replaceable coil heads, the CE4 is generally used as a complete disposable clearomiser.
Once the internal coil becomes worn or performance drops significantly, the whole clearomiser is replaced.
This format became extremely common on early eGo-style vape kits because it required very little maintenance.
A CE4 combines:
into one compact unit.
You refill the reservoir while it remains usable, but there's no need to dismantle it to install a replacement coil.
That simplicity makes the CE4 one of the most straightforward refillable tank formats around.
The main difference is whether the heating coil is independently replaceable.
If you want the simplest possible setup, CE4 has fewer individual parts to manage.
If you prefer replacing only the worn heating element, EVOD-style tanks are more practical.
The term clearomiser is most commonly associated with older refillable vape tanks.
It describes a tank with a transparent or semi-transparent reservoir that allows you to see the remaining e-liquid.
In practical terms, clearomisers perform the same fundamental job as modern vape tanks and pods:
The terminology has simply changed as vape hardware has evolved.
These tanks make the most sense for people using older or traditional pen-style vaping hardware.
They can be particularly useful if you:
They're very different from current sub-ohm tanks and high-powered pod mods.
The KangerTech tanks in our current range are primarily intended for MTL, or mouth-to-lung vaping.
MTL means drawing vapour into the mouth first before inhaling.
Typical characteristics include:
This is much closer to the behaviour of a classic vape pen than a large sub-ohm tank.
Traditional KangerTech clearomisers are generally better suited to thinner e-liquids than modern high-powered sub-ohm tanks.
A 50VG/50PG liquid is a sensible starting point for many EVOD and CE4-style setups.
Common choices include:
Very thick high-VG e-liquids may wick less effectively through smaller older-style coil heads.
Higher-resistance KangerTech clearomisers can be suitable for nicotine salt e-liquids when paired with an appropriate low-powered battery.
Their relatively tight draw and modest vapour output fit the same general MTL style commonly associated with nic salt pod systems.
The exact nicotine strength should still be chosen separately according to individual requirements.
EVOD-style tanks were designed around eGo-type connections, which were extremely common on older pen-style vape batteries.
Many eGo batteries also incorporate a 510 thread, giving them compatibility with a broad range of compact hardware.
The EVOD 2, for example, uses an eGo-threaded connection and is intended for standard eGo or EVOD-style batteries.
Always check the connection on your actual battery before ordering.
The EVOD family uses replaceable coil heads.
The exact coil depends on the version of the tank.
The EVOD 2 uses KangerTech bottom dual-coil heads, with 1.5Ω commonly supplied as standard.
KangerTech also used similar dual-coil heads across several older tanks, including certain Protank and Aerotank models.
That historical cross-compatibility can be useful, but you should still check the exact tank and coil before ordering.
One of the easiest ways to choose between these tanks is to consider how much maintenance you want.
When the flavour or vapour begins to deteriorate:
When the coil reaches the end of its useful life:
Neither system is difficult.
The CE4 simply removes one extra maintenance step.
EVOD-style clearomisers use bottom filling.
The EVOD 2 follows this bottom-fill layout.
CE4 clearomisers are generally filled from the top.
Don't overfill the tank.
Whenever a fresh coil or clearomiser is filled for the first time, give the wick time to absorb e-liquid before applying power.
With an EVOD coil:
With a CE4, the same principle applies after the initial fill.
Dry wicking material can burn if heated before it becomes properly saturated.
There's no exact lifespan that applies to everybody.
Coil life depends on:
The clearest indication is usually a change in performance rather than a specific number of days.
Common signs include:
With an EVOD, replace the coil.
With a CE4, replace the complete clearomiser.
A burnt taste usually means the wick has become too dry or the coil has reached the end of its useful life.
Common causes include:
Once the wick itself has scorched, replacing the coil is normally the only proper solution.
Gurgling usually means excess e-liquid has entered the coil or central airflow passage.
Potential causes include:
A little condensation is normal.
Persistent liquid inside the airflow path is not.
Possible causes include:
Make sure every component is seated correctly before replacing parts unnecessarily.
Basic habits help:
These are relatively simple devices, so maintenance doesn't need to become complicated.
Modern pod systems have largely replaced this style of clearomiser for new devices.
Even so, the basic idea isn't radically different.
KangerTech tanks still make sense if you already own compatible hardware and simply want to keep it running.
Our KangerTech vape tank range keeps things decidedly old-school, with the EVOD, EVOD 2 and CE4 clearomiser formats providing simple refillable options for compatible pen-style and eGo batteries.
The EVOD and EVOD 2 give you the option of replacing the coil while retaining the tank, whereas the CE4 offers an even simpler disposable-clearomiser format.
They're compact, straightforward and designed around traditional MTL vaping rather than modern high-powered hardware.
If you've still got a reliable eGo or EVOD-style battery in service, these classic KangerTech tanks are an easy way to keep that setup going.
