Click & Collect:Available
Loyalty Points: Click for info
Best Sellers
Multi-Buy Deals
Deals
Vape Kit Types
Filter Products
Coil Type
Fill Type
Pack Size
Pod Type
Tank Type
Filter By
Keep your compatible VOOPOO kit running with our range of VOOPOO vape pods, including replacement cartridges for popular ARGUS, VINCI and ITO-based devices. With both built-in coil pods and cartridges that accept separate replacement coils, the most important step is matching the pod platform to your exact device before choosing a resistance or draw style.
Active filters
A vape pod is the removable cartridge that holds your e-liquid and connects to the battery section of a pod kit.
Depending on the VOOPOO system you're using, the coil may either be built directly into the cartridge or installed separately.
Our current range includes both formats.
Some cartridges, such as the ARGUS Top Fill and VINCI E ranges, integrate the coil into the pod. When performance drops, the complete cartridge is replaced.
ITO pods work differently. They act as a reusable tank section and accept separate ITO replacement coils.
That distinction matters because two VOOPOO pods can look broadly similar while using completely different internal systems.
The exact resistance options and compatibility differ by cartridge, so always check the individual listing before ordering.
The VOOPOO ARGUS Top Fill cartridge is one of the main replacement pod systems used across the ARGUS Pod Family.
These cartridges combine the e-liquid reservoir and heating coil into a single replaceable unit, removing the need to fit a separate coil.
VOOPOO offers the ARGUS Top Fill range in several resistance options, including:
The 0.4Ω version operates at approximately 18–30W, the 0.7Ω at around 14–18W and the 1.0Ω at roughly 10–14W.
That gives the same pod family a useful spread from looser RDL use down to tighter MTL.
The lower-resistance pod generally produces warmer vapour and greater output, while the 1.0Ω version runs at lower power and provides a more restricted draw.
Resistance is only one part of the picture, though. Airflow settings and device output also affect how each cartridge behaves.
The ARGUS Top Fill Cartridge V2 is the updated generation of the ARGUS cartridge platform.
VOOPOO introduced it with upgraded internal materials and its iCOSM CODE 2.0 system, while retaining broad compatibility within the ARGUS Pod Family.
Like the original top-fill cartridge, the coil is built into the pod.
That means:
Once the internal coil begins to deteriorate, you replace the whole cartridge.
The original and V2 cartridges share the same overall concept, but the V2 is the newer version.
VOOPOO states that ARGUS Pod Family cartridges have broad compatibility across devices within that family.
Even so, it's sensible to check the specification of your exact device, particularly with newer hardware that may introduce additional cartridge formats.
ARGUS cartridges are used across a wide selection of VOOPOO devices.
Depending on the exact cartridge and device generation, compatible hardware can include models from the ARGUS pod family such as:
The key phrase here is ARGUS Pod Family.
Larger ARGUS pod-mod devices that use PnP or PnP X hardware are separate systems and shouldn't be assumed to take these small integrated cartridges.
The VOOPOO VINCI E cartridge is a newer integrated-coil platform used on compatible VINCI devices.
VINCI E cartridges are available in resistance options including:
The lower 0.3Ω resistance is aimed towards a more open, higher-output style, while the 0.6Ω cartridge brings the power down and moves towards a more restricted draw.
Some newer VINCI platforms also support additional integrated cartridge resistances depending on the device, so compatibility should be checked against the exact kit being used.
VOOPOO has used the VINCI name across several different generations.
That can make compatibility look more straightforward than it really is.
A modern VINCI E cartridge has its coil built directly into the pod.
Other VINCI products have used:
These are not one universal system.
Just because the word "VINCI" appears on both products doesn't mean the cartridge will fit.
Our range also includes the earlier VOOPOO VINCI Pod format.
These cartridges were designed for compact VINCI devices such as the VINCI Pod family rather than the larger PnP-based VINCI pod-mod systems.
Compatible devices across this generation can include:
These are therefore a separate family from the newer VINCI E cartridges.
The VOOPOO ITO Pod takes a different approach from the integrated-coil ARGUS and VINCI cartridges.
Instead of replacing the whole pod when the coil wears out, the cartridge accepts separate ITO replacement coils.
That means the pod itself can often remain in use while only the internal coil is changed.
VOOPOO offers the ITO coil family in several resistances:
That gives compatible devices a useful range from looser RDL through to tighter MTL.
ITO pods are compatible with several Doric devices.
Examples include:
Other ITO-based hardware also exists, so always check the product specification if you're using a different device.
The advantage of this system is that the pod and coil are separate.
If the cartridge itself is still in good condition but flavour has dropped off, a new coil may be all you need.
This is one of the most useful distinctions to understand.
Integrated pods are generally simpler.
There is no coil to remove, align or install.
Separate-coil systems involve a little more maintenance, but they allow the cartridge itself to be reused through multiple coil changes.
Neither approach is automatically better.
They simply prioritise different things.
Start with the exact device name.
Don't choose based on appearance alone.
Look for a compatible ARGUS Top Fill or ARGUS Top Fill V2 cartridge, depending on the exact device and supported pod range.
Choose a compatible VINCI E cartridge and then select the appropriate resistance.
You'll generally need an ITO pod plus a compatible ITO coil.
Check for the appropriate VINCI integrated cartridge rather than assuming newer VINCI E or PnP X hardware will fit.
Resistance is measured in ohms (Ω).
As a broad guide:
For example, within the ARGUS range:
MTL, or mouth-to-lung, describes drawing vapour into the mouth before inhaling.
Suitable VOOPOO pod options can include:
These typically operate at lower power and pair naturally with a tighter airflow.
Common characteristics include:
RDL, or restricted-direct-lung, provides more airflow than traditional MTL while still remaining noticeably tighter than a full DTL sub-ohm tank.
Within VOOPOO's current pod ecosystem, examples include:
These generally operate at higher power than the tightest MTL cartridges.
You can expect:
Most smaller VOOPOO pod systems are designed around MTL and RDL rather than very high-powered sub-ohm use.
For many cartridges, 50/50 e-liquid is a sensible choice.
Typical options include:
Lower-resistance cartridges operating at greater power may also handle somewhat thicker liquids depending on the exact pod.
Higher-resistance, lower-powered pods are generally the natural choice.
Options such as the ARGUS 1.0Ω cartridge and higher-resistance ITO coils are particularly well suited to MTL use with 50/50 nicotine salt e-liquid.
The 0.7Ω ARGUS pod can also work well if you prefer a slightly looser draw.
Very low-resistance cartridges operate at greater power, so nicotine strength should be considered more carefully as power increases.
Top filling is now used across several VOOPOO cartridge families.
Rather than removing a plug from the base of the pod, the filling port can be accessed from the upper section of the cartridge.
Benefits can include:
Both the ARGUS Top Fill and ARGUS Top Fill V2 ranges use this approach.
The exact method varies between cartridges.
For a top-fill pod:
For side-fill cartridges, remove or expose the filling plug and follow the same basic principle.
Never force a seal or cap that appears stuck.
A fresh integrated pod contains dry wicking material.
Before using it:
This gives the wick time to absorb liquid before the heating element becomes hot.
Skipping this step can damage a new cartridge almost immediately.
ITO pods use separate coils, so the process is slightly different.
If the pod has been empty for some time, make sure the fresh coil is completely wet before firing.
There isn't one fixed lifespan.
An integrated pod lasts until its internal coil deteriorates or the cartridge itself becomes damaged.
A separate-coil ITO pod can potentially remain in use for considerably longer because only the coil needs routine replacement.
Actual coil life varies with:
Newer cartridge technologies may be designed to improve coil longevity, but real-world lifespan still depends heavily on how the pod is used.
For an integrated cartridge, common signs include:
If you're using an ITO pod, these symptoms may indicate that the coil needs replacing rather than the complete cartridge.
A burnt taste usually means the wick has become too dry or has already scorched.
Possible causes include:
Once the wick has genuinely burnt, adding more e-liquid normally won't repair it.
Replace the cartridge or coil.
Gurgling usually indicates excess liquid around the coil or inside the airflow channel.
This can happen because of:
If the issue keeps returning alongside weak vapour or poor flavour, the coil may be nearing the end of its usable life.
A small amount of condensation beneath a pod is normal.
A large amount of e-liquid isn't.
Check for:
Newer ARGUS V2 cartridges include updated measures designed to reduce leaking, but no refillable cartridge should be treated as completely immune to liquid or condensation.
Good maintenance is fairly simple:
The aim isn't to make a consumable last forever.
It's to avoid damaging it unnecessarily early.
These names refer to different VOOPOO product ecosystems.
There is some compatibility within each family, but very little reason to assume compatibility across them.
An ARGUS cartridge isn't an ITO pod, and a VINCI E pod isn't simply another version of an ARGUS cartridge.
No.
VOOPOO has produced a large range of cartridges over several generations.
The brand currently uses or has used systems including:
These are not one universal pod system.
Always match:
Check the exact name of your device first, then match it to the cartridge platform specified by VOOPOO.
VOOPOO lists broad compatibility across the ARGUS Pod Family, although exact support should still be checked against the individual device.
Yes. ARGUS Top Fill and Top Fill V2 cartridges have built-in coils, so the complete pod is replaced when the coil wears out.
The 1.0Ω cartridge is the most clearly MTL-focused option among the common 0.4Ω, 0.7Ω and 1.0Ω versions.
The 0.4Ω cartridge is the more open option and operates at approximately 18–30W, while 0.7Ω provides a middle ground.
No. ITO pods accept separate replaceable ITO coils.
Compatible models include the Doric E, Doric Q, Doric 20 and Doric 20 SE.
No. VINCI E is a newer integrated cartridge platform and shouldn't be assumed to fit older VINCI Pod hardware.
Not unless VOOPOO explicitly lists that specific device and cartridge as compatible. ARGUS and VINCI are separate product families.
Many higher-resistance VOOPOO pod cartridges are well suited to lower-powered MTL use with 50/50 nicotine salt e-liquid.
There is no fixed schedule. Replace an integrated cartridge when flavour or vapour noticeably deteriorates, or sooner if the pod becomes physically damaged.
Our VOOPOO vape pod range covers several of the manufacturer's main cartridge systems, from convenient integrated ARGUS Top Fill and ARGUS Top Fill V2 pods to newer VINCI E cartridges and reusable ITO pods with separate replacement coils.
That variety gives you plenty of choice, but it also makes compatibility particularly important.
Start with the exact device you're using, identify the cartridge family it accepts and only then choose the resistance.
Get those details right and replacing the pod is a straightforward way to keep a compatible VOOPOO device working as intended.
